| Customization: | Available |
|---|---|
| Type: | Polyurethane Foam Machine |
| Raw Material: | Polyurethane |
|
Still deciding? Get samples of US$ 7300/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Reactor pu foam spray machine/polyurethane foam spray machine/foam insulation spray machine
Hydraulic polyurea foam spray machine spray: the construction of the external walls of spraying, spraying products, cold storage spray, refrigerated trucks spraying, roof spraying, industrial anti-corrosion, cabin, carriages, cars, tanks.
Hydraulic pressure polyurea and polyurethane insulation spray machine, hydraulic pressure polyurea and polyurethane insulation spray machineHydraulic polyurea foam spray machine casting: solar water heaters, insulation tanks, refrigerators, security doors, cabin, insulation boards, pipe joints, product packaging, road construction, wall noise
Primary Heating System
The primary heating system consists of two separate
independent block heaters with no seals.
Independent Hose Heating System
Designed with two 4000W isolation transformers, unit allows
the individual heating of each component hose up to 150m.
Double Acting Piston Proportioning Pumps
Each pump is individually driven by a hydraulic cylinder
to deliver the adequate volume of each component in
order to achieve the desired mixing ratio.
Recirculation System
The Recirculation System allows to heat the products
automatically, with no need to switch on the machine,
reducing the time of preparation prior to start spraying.
Central Processing Unit (CPU)
The CPU´s software processes and controls all application parameters entered on the screens assuring
that any alteration that may occur will be corrected while the unit continues working.
| Project | CNMC-500L |
| Fixed host configuration | 1 set |
| Self-cleaning spray gun | 1 set |
| Gross weight | 350KG |
| Feed pump | 2 sets |
| Heated hose | 49.2 ft (15 m) |
| Data ratio of raw materials | 1: 1 (fixed) |
| Raw material viscosity range | 200-1000CPS (at working temperature) |
| Max working pressure | 23MPa (230 bar) |
| Maximum Fluid Temperature | 88 ° C (190 ° F) |
| Maximum output | 24 kg / min (50 lb / min) |
| Each heater power | 7500W |
| Heating hose power | 1000W / 15m |
| Total power | 21000W |
| Voltage | 230V 1-ph,230/ 400V 3-ph ,50/60hz |
){kind=link}