Multi-Industry Available Htjc-430 Crusher Crawler Typemobile Jaw Crusher

• Customization: Available
• Type: Jaw Crusher
• Motor Power: 15kw
• Model NO.: HTJC-430
• Application: Construction
• Materials: Limestone
• Outlet Size: 20-50mm
• Inlet Size: 250×400mm
• Condition: New
• Warranty: One Year
• After-sales Service: One Year
• Gasoline Engine: R500-V2
• Hydraulic Pump: CBN-F510
• Feed Port: 200*370
• Max Feed Size: 200mm
• Transport Package: 2.23*1.07*1.86
• Trademark: HIGHTOP

Product Description

HTJC-430 Crawler Jaw Crusher

• HTJC-430 Crawler Jaw Crusher

• Crawler Jaw Crusher

• Crusher

HTJC-430 Crawler Jaw Crusher

 

HTJC-430 Crawler Jaw Crusher Instruction

1. The power system adopts gasoline engine and diesel engine, and the engine is directly connected to the hydraulic pump, i.e. the whole vehicle is controlled by hydraulic pressure, and the walking is controlled by 18 chassis and 200 wide tracks.
2. Conveyor belt device lifting and lowering using oil cylinder control, discharge clearance from the ground can be controlled
3. Hopper volume 0.4m
4. Standard jaw crusher is used, with standardized fittings.
5. Crushing transmission mode using transmission motor, drive belt drive crusher, control direct manipulation of hydraulic multi-way valve
6. The whole car cover can be opened, easy maintenance.
The working system includes the drive motor to drive the jaw crusher, in the crushing process, a crushing chamber is formed between the movable jaw and the fixed jaw, the material enters into the crushing chamber from the inlet, and it is squeezed and crushed by the movable jaw and the fixed jaw each other. The movable jaw is driven by eccentric shaft to produce reciprocating motion, so that the material in the crushing cavity between the two jaw plates is subject to extrusion, bending and other forces, so as to break the large material into smaller particles, to achieve the effect of stone crushing; after crushing the stone through the conveyor device, the stone material will be transported to the discharge area.
 

HTJC-430 Crawler Jaw Crusher Parameter

 

Product parameters
Working size(mm):	3200*1000*1620	Vertical plate inner width (mm):	380
Shipping size (mm) :	2100*1000*1750	Total outer width of cover (mm)	960
Track type (mm):	180*72*41	Bunker volume(m3):	0.25
Weight wheel diameter (mm):	126	Stacking height (mm) :	700-1150
Number of wheels (groups) :	6	Feeding conveyor(mm)	1500*500
Feed port size (mm):	220*350	Gravel range(mm):	15-50
Maximum feed size(mm):	200	Travel speed (km/h):	0-3
Track specifications:	Rubber track	Conveyor belt width (mm):	400
Production capacity(T/h tons/hour):	2T-5T/h
Dynamic system		Oil type and dosage
Gasoline engine standard	Rato R500-V2-18HP	Fuel tank capacity /L	6.5L
Output power	13KWV/3600r/min	Oil volume /L	1.0L
Tank capacity /l	6.5	Hydraulic tank volume /L	35L 32#/46
Operating driving and main accessories parameters
Equipment operation mode		Manual hydraulic valve
Walking mode		Hydraulically powered track type
Travelling motor type		6K-395
Continuous torque		850
Hydraulic pump specifications		PGP5108
Conveyor motor model		BMER-300
Conveyer lifting mode		Manual operation of hydraulic lift
Lubrication method of jaw breaking mechanism		grease
Track tightening adjustment method		mechanical

HTJC-430 Crawler Jaw Crusher Images