Hydraulic Spray Machine Polyurethane PU Spray Foam Reactor Sprayer

• After-sales Service: One Year Warranty
• Warranty: One Year Warranty
• Type: Polyurethane Foam Machine
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: CNMC-300
• Principle: High-Speed Impeller Type
• Automation: Non-Automatic
• Computerized: Non-Computerized
• Certification: CE, ISO9001:2008
• Drive Mode: Hydraulic
• Voltage: 400V/380V/220V 50/60Hz 3phase
• Whole Power: 15kw
• Air Source: 0.5~0.8 MPa, 0.25m3/Minute
• Raw Material Output: 2-24kg/Min
• Maximum Output Pressure: 17MPa
• Ab Material Output Ratio: 1:1
• Max Heat Hose: 120m
• Transport Package: Wooden Case
• Specification: 86*86*156cm
• Trademark: CNMC
• Origin: China, Shandong

Product Description

Hydraulic Spray Machine Polyurethane Pu Spray Foam Reactor Sprayer with High Quality 

Hydraulic Spray Machine Polyurethane Pu Spray Foam Reactor Sprayer with High Quality  can be used for various construction environment with spraying a variety of two-component spray materials and has been widely used in embankment waterproof, pipeline corrosion, auxiliary cofferdam,tanks, pipe coating, cement layer protection, wastewater disposal, roofing, basement waterproofing, industrial maintenance, wear-resistant linings, cold storage insulation, wall insulation and etc.
 

Our polyurethane spray machine advantages:

1. The machine has a small size, light weight, low failure rate, simple operation, easy to move and so on.

2. Use the most advanced pneumatic booster devices, the maximum degree to ensure stability of equipment work.

3. Multiple raw material filter device to minimize the spray plug problem.

4. Multiple leakage protection system to protect the safety of the operator.

5. With an emergency switch system, to the most rapid response to emergencies.

6. Reliable and powerful heating system can make the raw material rapidly heating to the ideal state, to meet the normal construction of equipment.

7. The feeding volume can be adjusted, and has a regular, quantitative function, especially suitable for high-precision small batch of polyurethane casting to improve production efficiency.

8. The latest no-clean spray gun with small size, light weight, low failure rate.

9. Material taken pump use large ratio method, automatic mention material, high viscosity of winter raw materials can also easily feed.

Specifications:

Model	CNMC-300	CNMC-500
Power source	220V/380V 3 phase 50Hz	220V/380V 3 phase 50Hz
Heating power	15KW	17KW
Driven mode	hydraulic	hydraulic
Air source	0.5~0.8 MPa ≥0.25m³/min	0.5~0.8 MPa ≥0.25m³/min
Raw output	2~24 kg/min	2~24 kg/min
Maximum output pressure	17Mpa	25Mpa
AB material output ratio	1:1	1:1
Max hose support	120m	120m
Complete set list:
Main machine	1 set
Spray gun	1 set
Feeding pump	2 sets
Heating hose	15 meters
Spare parts tool box	1 set
User operation manual and video	1 copy

Detailed images:

hydraulic equipment uses hydraulic power to operate chemical proportioning pumps and is commonly used for the application of polyurea coatings and dual-component foam. Some of the systems even include a valve that allows the direction of the sprayer to change. The fast pump changeover is the machine's most appealing attribute, resulting in very minimal pressure loss when the direction changeover occurs.

As the chemicals used in spray foam need to mix before application, the hydraulic application allows for better monitoring methods to assure that the mixture of chemicals is consistent and proportional during application. If the system detects improper operation of bad mixing, it shuts down automatically to prevent bad product distribution, allowing the operator to address the issue rather than apply poor product.

Appliacation:
Shipment